1 1/2″ Adjustable Brass Serac (Frothy) Nozzle
1 1/2" NPT Female-Threaded Adjustable Brass Serac Nozzle, 2 7/8" OD x 11/16" ID.
This level dependent nozzle has its jet below the surface of the water. If the water level drops, the cascade will produce a taller, thinner pattern. Thus to maintain a consistent effect, the water level must remain constant. This is typically accomplished by using an autofill unit in the fountain pool with a dedicated water line and an overflow. Level dependent fountain nozzles also require more pump horsepower as well as higher light wattage than similarly sized level independent fountain nozzles. The water stream has a white frothy look and is more wind-resistant. Level dependent nozzles include cascades, bubblers, geysers and most types of aerator nozzles.
- Here is our return policy if the nozzle you purchase does not work for your situation, and you need to return it within 30 days.
- There is a 25% re-stocking fee to return the parts though, so please review the sizing information below.
Pipe thread sizes do NOT refer to any physical dimension. The outside diameter of each nozzle must be measured and compared to Table 1.1 for correct size identification. For example, a 1/4” NPT nozzle has an outside thread diameter of 0.540”
-
TABLE 1.1 How to Determine NPT (National Pipe Thread) Size NPT SIZE THREAD OUTSIDE DIAMETER 1/8" 0.405" 1/4" 0.540" 3/8" 0.675" 1/2" 0.840" 3/4" 1.050" 1" 1.315" 1-1/4" 1.660" 1-1/2" 1.900" 2" 2.375" 2-1/2" 2.875" 3" 3.500" 4" 4.500" 5" 5.563"