4-Tier Acanthus Leaf Fountain, D48″ x H72″, Wild Rose Granite

Get A Quote Now!

Compliment your landscape with this custom hand-carved Granite Fountain (4-Tier Acanthus Leaf). This classical fountain is hand-carved of Wild Rose Granite featuring a finial with Acanthus carved details and four tiered petal-like basins below. This large fountain is in-stock and can work perfectly as an any landscape fountain, estate fountain, courtyard fountain, motor court fountain, arrival fountain, garden fountain, etc…

• Centerpiece Only
• Dimensions: 48" Dia. x 72" H.
• Material: Wild Rose Granite
• Pump is not included - as pump size will depend on how the fountain is set up.
• Check out this Blog Post to learn more about why a GRANITE fountain is better than other more porous stones, and can essentially last FOREVER!
• And if you'd like to learn more about fountain maintenance, we have many blog posts about that in this area of our website.

Please Note:

• Photo is representative of the typical carving details on this fountain. Each hand carved fountain is a little different than the next based on the artisan that carved it.
• Variations in the natural stone can exhibit unique veining and coloration. So, you can be assured that no one in the world will have one EXACTLY like yours!
• Also, if this color of granite doesn't work well with your surroundings, we also have other colors of this type of fountain here: All 4-Tier Acanthus Fountains
• Keep in mind though, that natural stone is typically a lighter color when it's dry vs a darker/more vibrant color when it's wet.
  • Check the sample page photos, noted in the material heading above, to see what this granite looks like wet vs dry.
  • If you like the lighter color, you can seal it with a product called Miracle 511 Porous Plus, to keep it that way for several years, and also make it easier to clean if algae - dirt get on it.
  • Or, if you like the darker version of the color, you would seal it with a product called Miracle 511 Seal/Enhance - to keep it that color for several years (until the sealer wears off.)

· Depending on how you want your fountain to sound and operate, consider one of the following fountain configurations:

1. A Self-Contained Fountain.

• • This is where the pump sits concealed within the bottom bowl. Only the 2 upper bowls spill water and it requires the smallest pump of all options.
  • Warning, depending on relative humidity and how windy it is that day, this kind of fountain can run out of water relatively quickly.
  • We recommend a 18" round footing x 4' deep or to below frost line under the fountain for maximum stability

2. A Modified Self Contained Fountain(sump-pit option)

• • Still only the 2 upper bowls spill water, but you are able to include an autofill kit to maintain the water level in the fountain at all times.
  • This requires a larger pump than the self-contained option.
  • Pump size also depends on the distance between the sump pit and the actual fountain. The fountain and pump could be up to 20-feet apart if you would like the fountain in a courtyard but to hide the sump pit behind some shrubs or the courtyard wall.
  • Here is a blog post to explain more about this kind of fountain installation: Modified Self Contained Water Fountains
  • We recommend a 18" round footing x 4' deep or to below frost line under the fountain for maximum stability

3. You can make a Disappearing Fountain and place this centerpiece over a pond less basin.

• • The pump sits within the gravel-covered plastic basin dug into the ground directly beneath the fountain and all 3 fountain tiers spill water into each other and then right to the polished rocks on the ground.
  • An autofill kit can be mounted to the inside wall of the pondless basin basin, so then you do not even have to fill it up with a hose.
    • Please note, the water must fall into rocks over the basin, wood chips should not be installed there, as they will degrade over time and foul your pump.
  • Here is a blog post to explain more about this kind of fountain installation: Installing a Disappearing Fountain
  • This kind of installation (as well as the modified self contained) is very good if you have many trees in the area, which would otherwise drop leaves into a pool, and cause major maintenance needs with your pump.

4. Or, this centerpiece can be paired with an 8' or 10' diameter fountain pool surround for a much larger display.

• • This also provides you with the most sound of all options.
  • In addition to an autofill, enjoy optional effects like underwater LED lighting or a fountain spray ring.
  • If you need help finding a matching pool surround, just contact us via: sales@carvedstonecreations.com

Here is this particular fountain running with a 10' Cornucopia Surround carved in the same Wild Rose granite color, with 3/4" Adjustable Brass Nozzles added to each corucopia for added interest:

https://www.youtube.com/watch?v=WtyjgTCDUSk